trim disc 71
Automatic Side Edge Grinding
and Base Edge Tuning Machine
Qualtity:
Singlesided disc edge tuning machine for skis
and snowboards
Economical, versatile:
The side autofeed guarantees an even grinding result
and eliminates the need for binding bridges
Revolutionary Ceramic Disc Technology:
Used by reputable ski manufacturers, for perfect grinding finish:
Advantages of Ceramic Disc Finish:
- Precise edge geometry
- Accurate angle along the whole length of the ski/board
- Fine, smooth edge surface
- Self-sharpening ceramic discs
- Skis/boards turn better guaranteeing enhanced performance and more fun
- Skis/boards grip better on icy slopes, which greatly improves safety
- Edges remain sharper longer
Space saving
Side and base edge grinding in one machine, compact design
|
 |
|
 |
|
 |
|
No limits. The trim disc 71 is an allround tuning machine that handles skis, carvers, snowboards, junior skis or fun skis with no problem at all. With the trim disc 71 from WINTERSTEIGER you can offer the widely known Ceramic Disc Finish technology to a broad spectrum of mountain sport enthusiasts. |
|
|
At the touch of a button! The trim disc 71 is equipped with a single sided ceramic disc aggregat that finishes both side and base edges of skis and boards with a modern technology. At the flick of a switch, you can change the position of the disc from side edge to base edge tuning. That saves you time and space! |
|
Safe and fast! Just line up the ski or board next to the disc aggregate, give one touch on the foot pedal and you activate the side autofeed roll which guides the ski or board precisely through the machine. If you give another touch on the foot pedal you end the grinding process, so you can control individually whether to grind the whole edge or just a specific section. This way you can give every edge the care that it needs. That saves you time and gives you the confidence of knowing that you give every ski and board a top quality, professional finish. |
|
 |
|
So simple! The side autofeed eliminates the need for binding bridges or for dismantling bindings. The driven feed rollers guide the ski or board at a constant speed and pressure over the grinding disc, guaranteeing a consistently great finish. |
|
Using the trim disc 71 from WINTERSTEIGER you can select the angle of the side and base edges according to skiing ability. This means you can offer every skier, whether novice or racer, more security and enjoyment, even on hard and icy snow. |
|
 |
|
|
 |
|
Ceramic Disc Finish! The conventional sanding belt has been replaced by ceramic grinding discs. The Ceramic Disc Finish is already used by all the well-known ski manufacturers and offers the following advantages: |
precise edge geometry along the whole length of the ski or board
accurate edge angles
fine, smooth edge surface
self-sharpening ceramic discs
|
Performance and success. The trim disc 71 signifies TOP edge quality thanks to innovative and pioneering technology. Its success is obvious: |
skis and boards turn more easily and offer more fun
better grip on icy snow
edges stay sharper longer
|
Small in appearance, great in performance! The ergonomic design of the
trim disc 71 simplifies the edge preparation work and completes your machine park with a compact
device which offers best quality tuning for skis and boards for the first time. |
