TRC Board

Fully automatic wood surface repair

TRC Board is a modular platform for the fully automatic repair of individual boards.

This system is intended for medium output with high performance for commercial and industrial enterprises. It produces perfect repairs of damaged timber surfaces. Defects are repaired with thermoplastic or organic filling material using injection units. Due to the precision injection and the precise calculation of the filling quantity, no filling material is wasted.

The TRC Board is also optionally equipped with a face ruler, which can also be used to measure and repair cracks on the face of the material. In addition to this, all defects directly around the edges can also be filled.

Application areas

Wood dimensions

Application areas

Top layers
Engineered wood flooring
Solid wood flooring
Finished lumber
etc.

Wood dimensions

Min. / max. length	500 mm / 3000 mm
Min. / max. width	100 mm / 350 mm
Min. / max. thickness	3 mm / 30 mm (TH version), 9 mm / 30 mm (OR version)

Duplex version

The system can be optionally equipped with two different filling materials at the same time. Each of the two repair units is equipped with an additional injection unit.

Cooled supporting table

Thanks to the cooled, full-length supporting table with external cooling system, products with rough defects, such as knotholes through the entire lamella thickness as well as lamella/top layers, can be repaired with ease.

Handling system – manual feeding

The feed is designed so that the planks can be placed close to one another. This also enables (automated) layer-by-layer placement of planks on the cross conveyor.

Handling system – manual removal

The TRC Board can be optionally equipped with a return conveyor system, which can be operated by just one person. The return conveyor system consists of a cross conveyor and a roller conveyor. The roller conveyor is connected to the cross conveyor and conveys the planks back so they can subsequently be stacked manually.

Control scan

If required, a second scan unit can be integrated. It controls the quality of the boards following repair.

Random length

The "Random Length" function allows boards of different lengths to be processed directly one after another without the need for any adjustment. This function comes as standard with TRC Board.

Face ruler and side guide

The face ruler and side guide are needed when the damage is on the edge of the boards. The following profile seals are available:

Longitudinal profile seals (right and left)
Front/end profile seals

Options

In order for us to supply you with the perfect system for your capacity, repair, material flow, and other requirements, we make use of a modular system with the following options and/or configurations:

Number of repair units: 1 to 3 injection units

Filling material: Thermoplastic (TH) or organic (OR)

Options for TH version: Side guide and face ruler, duplex version, or cooled supporting table

Handling system: Handling system, manual feeding, or manual removal (cross conveyor, return conveyor)

Process flow: Control scan

TRC Board 2TH